一种磁控管用扼流线圈仿真设计

采用电路仿真软件仿真滤波组件S参数曲线,观察曲线随器件参数的变化;介绍利用三维全波电磁仿真软件HFSS简化设计流程的方法,并与测试结果对比。结果表明:利用3D仿真软件在满足器件设计精度的同时可以简化线圈的设计流程。     

Synthesis and luminescence properties of reddish-orange-emitting Ca2GdNbO6:Sm3+ phosphors with good thermal stability for high CRI white applications

Novel reddish-orange-emitting Ca₂GdNbO₆:Sm³⁺ phosphors based on the emission of ⁴G_5/2 → ⁶H_9/2 transition at 651 nm with the chromatic coordinate of (0.633, 0.366) were synthesized. The crystal structure and chemical purity were identified in detail. Under the 407 nm excitation, the optimum concentration of Sm³⁺ ion was found to be 5 mol% dominated by the dipole-dipole interaction in the Ca₂GdNbO₆ host material. The color purity of the sample with optimum doping was estimated to be about 78.38%. Besides, the thermal stability was also studied, and it was further found that the emission intensity remained 65.32% at 423 K. The packaged white LED device exhibited excellent CRI and CCT values of 92.43 and 4896 K. Finally, the polydimethylsiloxane film with a stable structure and flexible property was prepared. These above results reveal that novel reddish-orange-emitting Ca₂GdNbO₆:Sm³⁺ phosphors can be applied in high CRI white communication and flexible display applications.     

基于汉风色典的不同色差公式的色差均匀性

为给纺织行业在纺织品贸易和质量控制等方面优选色差公式提供参考,研究了3个重要的和1个最新色差公式的色差均匀性,借助国际上色样多、视觉等距性好的汉风色典,利用X-Rite测色仪测试近2万个色样的色度参数,然后分别从向度、彩度、浓度3个方向选取3万多对相邻色样,采用MatLab编程计算4种色差并统计分析其均值、不匀率和性能因子。结果表明:不同方向不同评价指标所得结果不尽相同;在色差均匀性方面,CAM16-UCS最好,CIEDE2000_(2∶1∶1)略优于CMC_(2∶1),且二者明显优于CIELAB;在色差大小方面由小到大依次为CIEDE2000_(2∶1∶1)、CMC_(2∶1)、CAM16-UCS、CIELAB。     

一体化波导阵面天线的分层结构设计

为解决一体化波导阵面天线内部结构复杂的问题,并控制成本,设计了一体化波导阵面天线的分层结构。应用Creo三维设计软件构建数字化模型,以单体模型为基础得到完整的阵面天线,并基于软件的可视化功能进行分层结构设计。在设计中,选取结构关键点作为分割面,将整体分割为易加工的零件,使一体化波导阵面天线易于制造。     

Spectroscopic investigations on high efficiency deep red-emitting Ca2SiO4:Eu3+ phosphors synthesized from agricultural waste

Europium doped calcium orthosilicate (Ca₂SiO₄) phosphors have been synthesized by the conventional high temperature solid-state reaction method in various concentrations from agricultural waste (egg shell as a CaO and rice husk as a SiO₂). These phosphors structure from X-ray diffraction and morphology from scanning electron microscopy have been examined. Concentration dependent Eu³⁺ ions luminescent properties in Ca₂SiO₄ phosphors have been studied from the excitation, emission and decay curves analysis. The ⁵D₀ → ⁷F_J transitions observed in luminescence spectrum allows to determine the site symmetry of the Eu³⁺ ion. A charge transfer band (CTB) at around 260?nm which is due to the Eu–O interaction in the host along with the 4f – 4f excitation bands due to Eu³⁺ ions in UV and blue regions are observed. The color co-ordinates determined from emission spectra varies with concentrations of Eu³⁺ ions and are found to fall in the red region. The decay curves show single exponential behavior for all concentrations of Eu³⁺ ions (0.01–0.4?mol%) and the lifetimes varied from 2.67 to 2.78?ms. It is worth noting that the present material is found to be far better than many red phosphors synthesized by using agricultural waste as raw materials.     

Decreasing Filter Cake Resistance by Using Packing Structures

Packed beds used in absorption columns are evaluated to determine whether they can also be beneficial for cake‐forming filtrations. To assess this, model systems are characterized and separated by using a dead‐end filter cell. Filtrations are conducted with different packings; the filtrate amount over time and resulting turbidity are evaluated. Packings increase the filter cake resistance and the separation time of the cakes formed with approximately incompressible solids. However, they exhibit a positive effect on the filtration of a more complex, compressible substance; the process is not only accelerated, but also the quality of the obtained filtrate is not compromised. These results demonstrate potential in the use of packed beds for the filtration of complex biogenic suspensions.     

Interface reactions between rutile coatings and molten aluminium or AlSi7Mg0.6 alloy

Rutile coatings deposited on corundum substrates are considered as promising functional elements improving the efficiency of the filtration of oxide inclusions out of aluminium melts. This contribution describes the reactions between rutile and two kinds of the aluminium melts and discusses the consequences of these reactions for the filtration process. It was found that the contact of rutile coatings with molten aluminium leads to the formation of a corundum layer at the solid/liquid interface. The exposure of the rutile coatings to molten AlSi7Mg0.6 alloy produces an interface layer of MgTiO₃. The interface layers possess defined orientation relationship to rutile which is characteristic for locally heteroepitaxial growth. The density functional theory calculations revealed that the TiO₂/α-Al₂O₃ and TiO₂/MgTiO₃ interfaces with the orientation relationships observed experimentally have low interface energies. The mechanisms of the interface layer formation and the impact of these layers on the degradation of the rutile coatings are discussed.     

Optoelectronic sensor device for monitoring the maceration of red wine: Design issues and validation

Enologists usually rely on spectrophotometers to perform the chromatic characterization of red wines. This work reports an optoelectronic instrument based on absorbance measurements aiming not only at the assessment of the chromatic characteristics of finished red wines, but at the supervision of the gradual maceration of fermenting grape musts as well. Maceration is a chemical process that takes place during the early stages of the fermentation that finally results in red wine. It is through maceration that wine acquires its distinctive chromatic features. Key issues related to the selection of optoelectronic components, the system design and its final validation using diluted wine samples are thoroughly discussed. Resolution figures lie in the range of one thousandth of an absorbance unit. Maceration has been successfully monitored with the proposed instrument using grape must samples extracted during the first three days from two different fermentations.     

Robust skin detection in real-world images

Human skin detection in images is desirable in many practical applications, e.g., human–computer interaction and adult-content filtering. However, existing methods are mainly suffer from confusing backgrounds in real-world images. In this paper, we try to address this issue by exploring and combining several human skin properties, i.e. color property, texture property and region property. First, images are divided into superpixels, and robust skin seeds and background seeds are acquired through color property and texture property of skin. Then we combining color, region and texture properties of skin by proposing a novel skin color and texture based graph cuts (SCTGC) to acquire the final skin detection results. Comprehensive and comparative experiments show that the proposed method achieves promising performance and outperforms many state-of-the-art methods over publicly available challenging datasets with a great part of hard images.